SAMP - Simple Application Messaging Protocol

Version 1.3

IVOA Proposed Recommendation 2011-09-05

This version:
1.3: Proposed Recommendation 2011-09-05 (Revision 1556)
Latest version:
Previous versions:
1.0: Working Draft 2008-06-25
1.11: Recommendation 2009-04-21
1.2: Recommendation 2010-12-16
1.3: Working Draft 2011-05-12
1.3: Working Draft 2011-07-28
Working Group:
M. Taylor (m.b.taylor@bristol.ac.uk)
T. Boch (boch@astro.u-strasbg.fr)
M. Fitzpatrick (fitz@noao.edu)
A. Allan (aa@astro.ex.ac.uk)
L. Paioro (luigi@lambrate.inaf.it)
J. Taylor (jontayler@gmail.com)
D. Tody (dtody@nrao.edu)
J. Fay (jfay@microsoft.com)
T. Boch, M. Fitzpatrick, M. Taylor


SAMP is a messaging protocol that enables astronomy software tools to interoperate and communicate.

IVOA members have recognised that building a monolithic tool that attempts to fulfil all the requirements of all users is impractical, and it is a better use of our limited resources to enable individual tools to work together better. One element of this is defining common file formats for the exchange of data between different applications. Another important component is a messaging system that enables the applications to share data and take advantage of each other's functionality. SAMP supports communication between applications on the desktop and in web browsers, and is also intended to form a framework for more general messaging requirements.

Status of this Document

This is an IVOA Proposed Recommendation made available for public review. It is appropriate to reference this document only as a recommended standard that is under review and which may be changed before it is accepted as a full recommendation.

Comments, questions and discussions relating to this document may be posted to the mailing list of the SAMP subgroup of the Applications Working Group, apps-samp@ivoa.net, or added to the SampRfcV13 Request For Comments page on the IVOA Wiki.

Changes since earlier versions may be found in Appendix B.

This document has been produced by the IVOA Applications Working Group.


1  Introduction
    1.1  Non-Technical Preamble and Position in IVOA Architecture
    1.2  History
    1.3  Requirements and Scope
    1.4  Types of Messaging
    1.5  About this Document
2  Architectural Overview
    2.1  Nomenclature
    2.2  Messaging Topology
    2.3  The Lifecycle of a Client
    2.4  The Lifecycle of a Hub
    2.5  Message Delivery Patterns
    2.6  Extensible Vocabularies
    2.7  Use of Profiles
3  Abstract APIs and Data Types
    3.1  Hub Discovery Mechanism
    3.2  Communicating with the Hub
    3.3  SAMP Data Types
    3.4  Scalar Type Encoding Conventions
    3.5  Registering with the Hub
    3.6  Application Metadata
    3.7  MType Subscriptions
    3.8  Message Encoding
    3.9  Response Encoding
    3.10  Sending and Receiving Messages
    3.11  Operations a Hub Must Support
    3.12  Operations a Callable Client Must Support
    3.13  Error Processing
4  Standard Profile
    4.1  Data Type Mappings
    4.2  API Mappings
    4.3  Lockfile and Hub Discovery
        4.3.1  Lockfile Location
        4.3.2  Lockfile Content
        4.3.3  Hub Discovery Sequences
    4.4  Examples
5  Web Profile
    5.1  Overview and Comparison with Standard Profile
        5.1.1  Hub Discovery
        5.1.2  Outward Communications
        5.1.3  Inward Communications
        5.1.4  Third-Party URLs
    5.2  Hub Behaviour
        5.2.1  Data Type Mappings
        5.2.2  API Mappings
        5.2.3  Hub HTTP Server
        5.2.4  Registration
        5.2.5  Callable Clients
        5.2.6  URL Translation
    5.3  Client Behaviour
    5.4  Security Mechanisms
        5.4.1  Local Host Restriction
        5.4.2  User Confirmation
        5.4.3  Client Authentication
        5.4.4  Security Summary
6  MTypes: Message Semantics and Vocabulary
    6.1  The Form of an MType
    6.2  The Description of an MType
    6.3  MType Vocabulary: Extensibility and Process
    6.4  Core MTypes
        6.4.1  Hub Administrative Messages
        6.4.2  Client Administrative Messages
A  Changes between PLASTIC and SAMP
B  Change History

1  Introduction

1.1  Non-Technical Preamble and Position in IVOA Architecture

SAMP, the Simple Application Messaging Protocol, is a standard for allowing software tools to exchange control and data information, thus facilitating tool interoperability, and so allowing users to treat separately developed applications as an integrated suite. An example of an operation that SAMP might facilitate is passing a source catalogue from one GUI application to another, and subsequently allowing sources marked by the user in one of those applications to be visible as such in the other.

The protocol has been designed, and implementations developed, within the context of the International Virtual Observatory Alliance (IVOA), but the design is not specific either to the Virtual Observatory (VO) or to Astronomy. It is used in practice for both VO and non-VO work with astronomical tools, and is in principle suitable for non-astronomical purposes as well.

The SAMP standard itself is neither a dependent, nor a dependency, of other VO standards, but it provides valuable glue between user-level applications which perform different VO-related tasks, and hence contributes to the integration of Virtual Observatory functionality from a user's point of view. Figure 1 illustrates SAMP in the context of the IVOA Architecture [1]. Most existing tools which operate in the User Layer of this architecture provide SAMP interoperability.

Figure 1: IVOA Architecture diagram [1]. The SAMP protocol appears in the "Using" region.

The semantics of messages that can be exchanged using SAMP are defined by contracts known as MTypes (message-types), which are defined by developer agreement outside of this standard. The list of MTypes used for common astronomical and VO purposes can be found near http://www.ivoa.net/samp/; many of these make use of standards from elsewhere in the IVOA Architecture, including VOTable, VOResource, Simple Spectral Access, UCD and Utype.

1.2  History

SAMP, the Simple Application Messaging Protocol, is a direct descendent of the PLASTIC protocol, which in turn grew - in the European VOTech [2] framework - from the interoperability work of the Aladin [3] and VisIVO [4] teams. We also note the contribution of the team behind the earlier XPA protocol [5]. For more information on PLASTIC's history and purpose see the IVOA Note PLASTIC - a protocol for desktop application interoperability [6] and the PLASTIC SourceForge site [7].

SAMP has similar aims to PLASTIC, but incorporates lessons learnt from two years of practical experience and ideas from partners who were not involved in PLASTIC's initial design.

Broadly speaking, SAMP is an abstract framework for loosely-coupled, asynchronous, RPC-like and/or event-based communication, based on a central service providing multi-directional publish/subscribe message brokering. The message semantics are extensible and use structured but weakly-typed data. These concepts are expanded on below. It attempts to make as few assumptions as possible about the transport layer or programming language with which it is used. It also defines a "Standard Profile" which specifies how to implement this framework using XML-RPC [8] as the transport layer. The result of combining this Standard Profile with the rest of the SAMP standard is deliberately similar in design to PLASTIC, and this has been largely successful in its intention of enabling PLASTIC applications to be modified to use SAMP instead without great effort. More recently (version 1.3) an additional "Web Profile" has been introduced, in order to facilitate use of SAMP from web applications.

1.3  Requirements and Scope

SAMP aims to be a simple and extensible protocol that is platform- and language-neutral. The emphasis is on a simple protocol with a very shallow learning curve in order to encourage as many application authors as possible to adopt it. SAMP is intended to do what you need most of the time. The SAMP authors believe that this is the best way to foster innovation and collaboration in astronomy applications.

It is important to note therefore that SAMP's scope is reasonably modest; it is not intended to be the perfect messaging solution for all situations. In particular SAMP itself has no support for transactions, security, or guaranteed message delivery or integrity. However, by layering the SAMP architecture on top of suitable messaging infrastructures such capabilities could be provided. These possibilities are not discussed further in this document, but the intention is to provide an architecture which is sufficiently open to allow for such things in the future with little change to the basics.

1.4  Types of Messaging

SAMP is currently limited to inter-application desktop messaging with the idea that the basic framework presented here is extensible to meet future needs, and so it is beyond the scope of this document to outline the many types of messaging systems in use today (these are covered in detail in many other documents). While based on established messaging models, SAMP is in many ways a hybrid of several basic messaging concepts; the protocol is however flexible enough that later versions should be able to interact fairly easily with other messaging systems because of the shared messaging models.

The messaging concepts used within SAMP include:

Publish/Subscribe Messaging:
A publish/subscribe (pub/sub) messaging system supports an event driven model where information producers and consumers participate in message passing. SAMP applications "publish" a message, while consumer applications "subscribe" to messages of interest and consume events. The underlying messaging system routes messages from producers to consumers based on the message types in which an application has registered an interest.
Point-to-Point Messaging:
In point to point messaging systems, messages are routed to an individual consumer which maintains a queue of "incoming" messages. In a traditional message queue, applications send messages to a specified queue and clients retrieve them. In SAMP, the message system manages the delivery and routing of messages, but also permits the concept of a directed message meant for delivery to a specific application. SAMP does not, however, guarantee the order of message delivery as with a traditional message queue.
Event-based Messaging:
Event-based systems are systems in which producers generate events, and in which messaging middleware delivers events to consumers based upon a previously specified interest. One typical usage pattern of these systems is the publish/subscribe paradigm, however these systems are also widely used for integrating loosely coupled application components. SAMP allows for the concept that an "event" occurred in the system and that these message types may have requirements different from messages where the sender is trying to invoke some action in the network of applications.
Synchronous vs. Asynchronous Messaging:
As the term is used in this document, a "synchronous" message is one which blocks the sending application from further processing until a reply is received. However, SAMP messaging is based on "asynchronous" message and response in that the delivery of a message and its subsequent response are handled as separate activities by the underlying system. With the exception of the synchronous message pattern supported by the system, sending or replying to a message using SAMP allows an application to return to other processing while the details of the delivery are handled separately.

1.5  About this Document

This document contains the following main sections describing the SAMP protocol and how to use it. Section 2 covers the requirements, basic concepts and overall architecture of SAMP. Section 3 defines abstract (i.e. independent of language, platform and transport protocol) interfaces which clients and hubs must offer to participate in SAMP messaging, along with data types and encoding rules required to use them. Section 4 explains how the abstract API can be mapped to specific network operations to form an interoperable messaging system, and defines the "Standard Profile", based on XML-RPC, which gives a particular set of such mappings suitable for general purpose desktop applications. Section 5 defines the "Web Profile", an alternative mapping suitable for web applications. Section 6 describes the use of the MType keys used to denote message semantics, and outlines an MType vocabulary.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [9].

2  Architectural Overview

This section provides a high level view of the SAMP protocol.

2.1  Nomenclature

In the text that follows these terms are used:

A broker service for routing SAMP Messages.
An application that talks to a Hub using SAMP. May be a Sender, Recipient, or both.
A Client that sends a SAMP Message to one or more Recipients via the Hub.
A Client that receives a SAMP Message from the Hub. This may have originated from another Client or be from the Hub itself.
A communication sent from a Sender to a Recipient via a SAMP Hub. Contains an MType and zero or more named parameters. May or may not provoke a Response.
A communication which may be returned from a Recipient to a Sender in reply to a previous Message. A Response may contain returned values and/or error information. In the terminology of this document, a Response is not itself a Message. A Response is also known as a Reply in this document.
A string defining the semantics of a Message and of its arguments and return values (if any). Every Message contains exactly one MType, and a Message is only delivered to Clients subscribed to that MType.
A Client is said to be Subscribed to a given MType if it has declared to the Hub that it is prepared to receive Messages with that MType.
Callable Client:
A Client to which the Hub is capable of performing callbacks. Clients are not obliged to be Callable, but only Callable Clients are able to receive Messages or asynchronous Responses.
To send a SAMP Message to all Subscribed Clients excluding the Sender.
A set of rules which map the abstract API defined by SAMP to a set of I/O operations which may be used by Clients to send and receive actual Messages.

2.2  Messaging Topology

SAMP has a hub-based architecture (see Figure 2). The hub is a single service used to route all messages between clients. This makes application discovery more straightforward in that each client only needs to locate the hub, and the services provided by the hub are intended to simplify the actions of the client. A disadvantage of this architecture is that the hub may be a message bottleneck and potential single point of failure. The former means that SAMP may not be suitable for extremely high throughput requirements; the latter may be mitigated by an appropriate strategy for hub restart if failure is likely.

Figure 2: The SAMP hub architecture

Note that the hub is defined as a service interface which may have any of a number of implementations. It may be an independent application running as a daemon, an adapter interface layered on top of an existing messaging infrastructure, or a service provided by an application which is itself one of the hub's clients.

2.3  The Lifecycle of a Client

A SAMP client goes through the following phases:
  1. Determine whether a hub is running by using the appropriate hub discovery mechanism.
  2. If so, use the hub discovery mechanism to work out how to communicate with the hub.
  3. Register with the hub.
  4. Store metadata such as client name, description and icon in the hub.
  5. Subscribe to a list of MTypes to define messages which may be received.
  6. Interrogate the hub for metadata of other clients.
  7. Send and/or receive messages to/from other clients via the hub.
  8. Unregister with the hub.
Phases 4-7 are all optional and may be repeated in any order.

By subscribing to the MTypes described in Section 6.4.1 a client may, if it wishes, keep track of the details of other clients' registrations, metadata and subscriptions.

2.4  The Lifecycle of a Hub

A SAMP hub goes through the following phases:

  1. Locate any existing hub by using the appropriate hub discovery mechanism.
    1. Check whether the existing hub is alive.
    2. If so, exit.
  2. If no hub is running, or a hub is found but is not functioning, write/overwrite the hub discovery record and start up.
  3. Await client registrations. When a client makes a legal registration, assign it a public ID, and add the client to the table of registered clients under the public ID. Broadcast a message announcing the registration of a new client.
  4. When a client stores metadata in the hub, broadcast a message announcing the change and make the metadata available.
  5. When a client updates its list of subscribed MTypes, broadcast a message announcing the change and make the subscription information available
  6. When the hub receives a message for relaying, pass it on to appropriate recipients which are subscribed to the message's MType. Broadcast messages are sent to all subscribed clients except the sender, messages with a specified recipient are sent to that recipient if it is subscribed.
  7. Await client unregistrations. When a client unregisters, broadcast a message announcing the unregistration and remove the client from the table of registered clients.
  8. If the hub is unable to communicate with a client, it may unregister it as described in phase 7.
  9. When the hub is about to shutdown, broadcast a message to all subscribed clients.
  10. Delete the hub discovery record.
Phases 3-8 are responses to events which may occur multiple times and in any order.

The MTypes broadcast by the hub to inform clients of changes in its state are given in Section 6.4.1.

Readers should note that, given this scheme, race conditions may occur. A client might for instance try to register with a hub which has just shut down, or attempt to send to a recipient which has already unregistered. Specific profiles MAY define best-practice rules in order to best manage these conditions, but in general clients should be aware that SAMP's lack of guaranteed message delivery and timing means that unexpected conditions are possible.

2.5  Message Delivery Patterns

Messages can be sent according to three patterns, differing in whether and how a response is returned to the sender:
  1. Notification
  2. Asynchronous Call/Response
  3. Synchronous Call/Response
The Notification pattern is strictly one-way while in the Call/Response patterns the recipient returns a response to the sender.

If the sender expects to receive some useful data as a result of the receiver's processing, or if it wishes to find out whether and when the processing is completed, it should use one of the Call/Response variants. If on the other hand the sender has no interest in what the recipient does with the message once it has been sent, it may use the Notification pattern. Notification, since it involves no communication back from the recipient to the sender, uses fewer resources. Although typically "event"-type messages will be sent using Notify and "request-for-information"-type messages will be sent using Call/Response, the choice of which delivery pattern to use is entirely distinct from the content of the message, and is up to the sender; any message (MType) may be sent using any of the above patterns. Apart from the fact of returning or not returning a response, the recipient SHOULD process messages in exactly the same way regardless of which pattern is used.

From the receiver's point of view there are only two cases: Notification and Asynchronous Call/Response. However, the hub provides a convenience method which simulates a synchronous call from the sender's point of view. The purpose of this is to simplify the use of the protocol in situations such as scripting environments which cannot easily handle callbacks. However, it is RECOMMENDED to use the asynchronous pattern where possible due to its greater robustness.

2.6  Extensible Vocabularies

At several places in this document structured information is conveyed by use of a controlled but extensible vocabulary. Some examples are the client metadata keys (Section 3.6), message encoding keys (Section 3.8) and Standard Profile lockfile tokens (Section 4.3).

Wherever this pattern is used, the following rules apply. This document defines certain well-known keys with defined meanings. These may be OPTIONAL or REQUIRED as documented, but if present MUST be used by clients and hubs in the way defined here. All such well-known keys start with the string "samp.".

Clients and hubs are however free to introduce and use non-well-known keys as they see fit. Any string may be used for such a non-standard key, with the restriction that it MUST NOT start with the string "samp.".

The general rule is that hubs and clients which encounter keys which they do not understand SHOULD ignore them, propagating them to downstream consumers if appropriate. As far as possible, where new keys are introduced they SHOULD be such that applications which ignore them will continue to behave in a sensible way.

Hubs and clients are therefore able to communicate information additional to that defined in the current version of this document without disruption to those which do not understand it. This extensibility may be of use to applications which have mutual private requirements outside the scope of this specification, or to enable experimentation with new features. If the SAMP community finds such experiments useful, future versions of this document may bring such functionality within the SAMP specification itself by defining new keys in the "samp." namespace. The ways in which these vocabularies are used means that such extensions should be possible with minimal upheaval to the existing specification and implementations.

2.7  Use of Profiles

The design of SAMP is based on the abstract interfaces defined in Section 3. On its own however, this does not include the detailed instructions required by application developers to achieve interoperability. To achieve that, application developers must know how to map the operations in the abstract SAMP interfaces to specific I/O (in most cases, network) operations. It is these I/O operations which actually form the communication between applications. The rules defining this mapping from interface to I/O operations are what constitute a SAMP "Profile" (the term "Implementation" was considered for this purpose, but rejected because it has too many overlapping meanings in this context).

There are two ways in which such a Profile can be specified as far as client application developers are concerned:
  1. By describing exactly what bytes are to be sent using what wire protocols for each SAMP interface operation
  2. By providing one or more language-specific libraries with calls which correspond to those of the SAMP interface
Although either is possible, SAMP is well-suited for approach (1) above given a suitable low-level transport library. This is the case since the operations are quite low-level, so client applications can easily perform them without requiring an independently developed SAMP library. This has the additional advantages that central effort does not have to be expended in producing language-specific libraries, and that the question of "unsupported" languages does not arise.

Splitting the abstract interface and Profile descriptions in this way separates the basic design principles from the details of how to apply them, and it opens the door for other Profiles serving other use cases in the future.

This document defines two profiles along the lines of (1) above. The Standard Profile (Section 4) which dates from the first version of this document, is suitable for desktop applications, while the Web Profile (Section 5), introduced at SAMP version 1.3, is suitable for web (browser-based) applications.

A client author will usually only need to implement SAMP communications using a single profile. Hub implementations should ideally implement all known profiles; in this way clients using different profiles can communicate transparently with each other via a hub which mediates between them. Since the different profiles are based on the same abstract interface, such mediation will not lead to loss or distortion of the communications.

3  Abstract APIs and Data Types

3.1  Hub Discovery Mechanism

In order to keep track of which hub is running, a hub discovery mechanism, capable of storing information about how to determine the existence of and communicate with a running hub, is needed. This is a Profile-specific matter and specific prescriptions are described in Sections 4.3 (Standard Profile) and 5.2.3 (Web Profile).

3.2  Communicating with the Hub

The details of how a client communicates with the hub are Profile-specific. Specific prescriptions are described in Sections 4 (Standard Profile) and 5 (Web Profile).

3.3  SAMP Data Types

For all hub/client communication, including the actual content of messages, SAMP uses three conceptual data types:
  1. string - a scalar value consisting of a sequence of characters; each character is an ASCII character with hex code 09, 0a, 0d or 20-7f
  2. list - an ordered array of data items
  3. map - an unordered associative array of key-value pairs, in which each key is a string and each value is a data item
These types can in principle be nested to any level, so that the elements of a list or the values of a map may themselves be strings, lists or maps.

There is no reserved representation for a null value, and it is illegal to send a null value in a SAMP context even if the underlying transport protocol permits this. However a zero-length string or an empty list or map may, where appropriate, be used to indicate an empty value.

Although SAMP imposes no maximum on the length of a string, particular transport protocols or implementation considerations may effectively do so; in general, hub and client implementations are not expected to deal with data items of unlimited size. General purpose MTypes SHOULD therefore be specified so that bulk data is not sent within the message. In general it is preferred to define a message parameter as the URL or filename of a potentially large file rather than as the inline text of the file itself.

At the protocol level there is no provision for typing of scalars. Unlike many Remote Procedure Call (RPC) protocols SAMP does not distinguish syntactically between strings, integers, floating point values, booleans etc. This minimizes the restrictions on what underlying transport protocols may be used, and avoids a number of problems associated with using typed values from weakly-typed languages such as Python and Perl. The practical requirement to transmit these types is addressed however by the next section.

3.4  Scalar Type Encoding Conventions

Although the protocol itself defines string as the only scalar type, some MTypes will wish to define parameters or return values which have non-string semantics, so conventions for encoding these as strings are in practice required. Such conventions only need to be understood by the sender and recipient of a given message and so can be established on a per-MType basis, but to avoid unnecessary duplication of effort this section defines some commonly-used type encoding conventions.

We define the following BNF productions:
  <digit>        ::= "0" | "1" | "2" | "3" | "4" | "5" | "6"
                   | "7" | "8" | "9"
  <digits>       ::= <digit> | <digits> <digit>
  <float-digits> ::= <digits> | <digits> "." | "." <digits>
                   | <digits> "." <digits>
  <sign>         ::= "+" | "-"

With reference to the above we define the following type encoding conventions:

The numeric types are based on the syntax of the C programming language, since this syntax forms the basis for typed data syntax in many other languages. There may be extensions to this list in future versions of this standard.

Particular MType definitions may use these conventions or devise their own as required. Where the conventions in this list are used, message documentation SHOULD make it clear using a form of words along the lines "this parameter contains a SAMP int ".

3.5  Registering with the Hub

A client registers with the hub to:
  1. establish communication with the hub
  2. advertise its presence to the hub and to other clients
  3. obtain registration information
The registration information is in the form of a map containing data items which the client may wish to use during the SAMP session. The hub MUST fill in values for the following keys in the returned map:
- The client ID which is used by the hub when it sends messages itself (rather than forwarding them from other senders). For instance, this ID will be used when the hub sends the samp.hub.event.shutdown message.
- The client ID which identifies the registering client.
These keys form part of an extensible vocabulary as explained in Section 2.6. In most cases a client will not require either of the above IDs for normal SAMP operation, but they are there for clients which do wish to know them. Particular Profiles may require additional entries in this map.

Immediately following registration, the client will typically perform some or all of the following OPTIONAL operations:

3.6  Application Metadata

A client may store metadata in the form of a map of key-value pairs in the hub for retrieval by other clients. Typical metadata might be the human-readable name of the application, a description and a URL for its icon, but other values are permitted. The following keys are defined for well-known metadata items:
- A one word title for the application.
- A short description of the application, in plain text.
- A description of the application, in HTML.
- The URL of an icon in png, gif or jpeg format.
- The URL of a documentation web page.
All of the above are OPTIONAL, but samp.name is strongly RECOMMENDED. These keys form the basis of an extensible vocabulary as explained in Section 2.6.

3.7  MType Subscriptions

As outlined above, an MType is a string which defines the semantics of a message. MTypes have a hierarchical form. Their syntax is given by the following BNF:
  <mchar>  ::= [0-9A-Za-z] | "-" | "_"
  <atom>   ::= <mchar> | <atom> <mchar>
  <mtype>  ::= <atom> | <mtype> "." <atom>

Examples might be "samp.hub.event.shutdown" or "file.load".

A client may subscribe to one or more MTypes to indicate which messages it is willing to receive. A client will only ever receive messages with MTypes to which it has subscribed. In order to do this it passes a subscriptions map to the hub. Each key of this map is an MType string to which the client wishes to subscribe, and the corresponding value is a map which may contain additional information about that subscription. Currently, no keys are defined for these per-MType maps, so typically they will be empty (have no entries). The use of a map here is to permit experimentation and perhaps future extension of the SAMP standard.

As a special case, simple wildcarding is permitted in subscriptions. The keys of the subscription map may actually be of the form <msub>, where
  <msub>   ::= "*" | <mtype> "." "*"

Thus a subscription key "file.event.*" means that a client wishes to receive any messages with MType which begin "file.event.". This does not include "file.event". A subscription key "*" subscribes to all MTypes. Note that the wildcard "*" character may only appear at the end of a subscription key, and that this indicates subscription to the entire subtree.

More discussion of MTypes, including their semantics, is given in Section 6.

3.8  Message Encoding

A message is an abstract container for the information we wish to send to another application. The message itself is that data which should arrive at the receiving application. It may be transmitted along with some external items (e.g. sender, recipient and message identifiers) required to ensure proper delivery or handling.

A message is encoded for SAMP transmission as a map with the following REQUIRED keys:
- A string giving the MType which defines the meaning of the message. The MType also, via external documentation, defines the names, types and meanings of any parameters and return values. MTypes are discussed in more detail in Section 6.
- A map containing the values for the message's named parameters. These give the data required for the receiver to act on the message, for instance the URL of a given file. The names, types and semantics of these parameters are determined by the MType. Each key in this map is the name of a parameter, and the corresponding value is that parameter's value.
These keys form the basis of an extensible vocabulary as explained in Section 2.6.

3.9  Response Encoding

A response is what may be returned from a recipient to a sender giving the result of processing a message (though in the case of the Notification delivery pattern, no such response is generated or returned). It may contain MType-specific return values, or error information, or both.

A response is encoded for SAMP transmission as a map with the following keys:
(REQUIRED) - A string summarising the result of the processing. It may take one of the following defined values:
Processing successful. The samp.result, but not the samp.error entry SHOULD be present.
Processing partially successful. Both samp.result and samp.error entries SHOULD be present.
Processing failed. The samp.error, but not the samp.result entry SHOULD be present.
These values form the basis of an extensible vocabulary as explained in Section 2.6.
(REQUIRED in case of full or partial success) - A map containing the values for the message's named return values. The names, types and semantics of these returns are determined by the MType. Each key in this map is the name of a return value, and the corresponding value is the actual value. Note that even for MTypes which define no return values, the value of this entry MUST still be a map (typically an empty one).
(REQUIRED in case of full or partial error) - A map containing error information. The following keys are defined for this map:
(REQUIRED) - A short string describing what went wrong. This will typically be delivered to the user of the sender application.
(OPTIONAL) - A free-form string containing any additional text an application wishes to return. This may be a more verbose error description meant to be appended to the samp.errortxt string, however it is undefined how this string should be handled when received.
(OPTIONAL) - A longer string which may contain more detail on what went wrong. This is typically intended for debugging purposes, and may for instance be a stack trace.
(OPTIONAL) - A string containing a numeric or textual code identifying the error, perhaps intended to be parsable by software. Values beginning "samp." are reserved.
These keys form the basis of an extensible vocabulary as explained in Section 2.6.
These keys form the basis of an extensible vocabulary as explained in Section 2.6.

In most cases, such responses will be generated by a Recipient client and forwarded by the Hub to the Sender. In some cases however the hub may pass to the sender an error response it has generated itself on behalf of the recipient. In particular, if the hub determines that no response will ever be received from the recipient (perhaps because the recipient has unregistered without replying) the hub MAY generate and forward a response with samp.status=samp.error and the samp.code key in the samp.error structure set to "samp.noresponse". Clients SHOULD NOT generate such samp.code=samp.noresponse responses themselves.

3.10  Sending and Receiving Messages

As outlined in Section 2.5, three messaging patterns are supported, differing according to whether and how the response is returned to the sender. For a given MType there may be a messaging pattern that is most typically used, but there is nothing in the protocol that ties a particular MType to a particular messaging pattern; any MType may legally be sent using any delivery pattern.

From the point of view of the sender, there are three ways in which a message may be sent, and from the point of view of the recipient there are two ways in which one may be received. These are described as follows.
In the notification pattern, communication is only in one direction:
  1. The sender sends a message to the hub for delivery to one or more recipients.
  2. The hub forwards the message to those requested recipients which are subscribed.
  3. No reply from the recipients is expected or possible.
Notifications can be sent to a given recipient or broadcast to all recipients. The notification pattern for a single recipient is illustrated in Figure 3.
Figure 3: Notification pattern
Asynchronous Call/Response:
In the asynchronous call pattern, message tags and message identifiers are used to tie together messages and their replies:
  1. The sender sends a message to the hub for delivery to one or more recipients, supplying along with the message a tag string of its own choice, msg-tag . In return it receives a unique identifier string, msg-id .
  2. The hub forwards the message to the appropriate recipients, supplying along with the message an identifier string, msg-id .
  3. Each recipient processes the message, and sends its response back to the hub along with the ID string msg-id .
  4. Using a callback, the hub passes the response back to the original sender along with the ID string msg-tag .
The sender is free to use any value for the msg-tag . There is no requirement on the form of the hub-generated msg-id (it is not intended to be parsed by the recipient), but it MUST be sufficient for the hub to pair messages with their responses reliably, and to pass the correct msg-tag back with the response to the sender1. In most cases the sender will not require the msg-id , since the msg-tag is sufficient to match calls with responses. For this reason, the sender need not retain the msg-id and indeed need not wait for it, avoiding a hub round trip at send time. The only case in which the sender may require the msg-id is if it needs to communicate later with the recipient about the message that was sent, for instance as part of a progress report. Asynchronous calls may be sent to a given recipient or broadcast to all recipients. In the latter case, the sender SHOULD be prepared to deal with multiple responses to the same call. The asynchronous pattern is illustrated in Figure 4.
Figure 4: Asynchronous Call/Response pattern
Synchronous Call/Response
A synchronous utility method is provided by the hub, mainly for the convenience of environments where dealing with asynchronicity might be a problem. The hub will provide synchronous behaviour to the sender, interacting with the receiver in exactly the same way as for the asynchronous case above.
  1. The sender sends a message to the hub for delivery to a given recipient, optionally specifying as well a maximum time it is prepared to wait. The sender's call blocks until a response is available.
  2. The hub forwards the message to the recipient, supplying along with the message an ID string, msg-id .
  3. The recipient processes the message, and sends its response back to the hub along with the ID string msg-id .
  4. The hub passes back the response as the return value from the original blocking call made by the sender. If no response is received within the sender's specified timeout the blocking call will terminate with an error. The hub is not guaranteed to wait indefinitely; it MAY in effect impose its own timeout.
There is no broadcast counterpart for the synchronous call. This pattern is illustrated in Figure 5.
Figure 5: Synchronous Call/Response pattern

Note that the two different cases from the receiver's point of view, Notification and Call/Response , differ only in whether a response is returned to the hub. In other respects the receiver SHOULD process the message in exactly the same way for both patterns.

Although it is REQUIRED by this standard that client applications provide a Response for every Call that they receive, there is no way that the hub can enforce this. Senders using the Synchronous or Asynchronous Call/Response patterns therefore should be aware that badly-behaved recipients might fail to respond, leading to calls going unanswered indefinitely. The timeout parameter in the Synchronous Call/Response pattern provides some protection from this eventuality; users of the Asynchronous Call/Response pattern may or may not wish to take their own steps.

3.11  Operations a Hub Must Support

This section describes the operations that a hub MUST support and the associated data that MUST be sent and received. The precise details of how these operations map onto method names and signatures is Profile-dependent. The mapping for the Standard Profile is described in Section 4.2, and for the Web Profile in Section 5.2.2.

Of these operations, only callAndWait() involves blocking communication with another client. The others SHOULD be implemented in such a way that clients can expect them to complete, and where appropriate return a value, on a timescale short compared to user response time.

3.12  Operations a Callable Client Must Support

This section lists the operations which a client MUST support in order to be classified as callable. The hub uses these operations when it wishes to pass information to a callable client. Note that callability is OPTIONAL for clients; special (Profile-dependent) steps may be required for a client to inform the hub how it can be contacted, and thus become callable. Clients which are not callable can send messages using the Notify or Synchronous Call/Response patterns, but are unable to receive messages or to use Asynchronous Call/Response, since these operations rely on client callbacks from the hub.

The precise details of how these operations map onto method names and signatures is Profile-dependent. The mapping for the Standard Profile is given in Section 4.2.

3.13  Error Processing

Errors encountered by clients when processing Call/Response-pattern messages themselves (in response to a syntactically legal receiveCall() operation) SHOULD be signalled by returning appropriate content in the response map sent back in the matching reply() call, as described in Section 3.9.

In the case of failed calls of the operations defined in Sections 3.11 and 3.12, for instance syntactically invalid parameters or communications failures, hubs and clients SHOULD where possible use the usual error reporting mechanisms of the transport protocol in use.

Where it is problematic or impossible to use the transport protocol's error reporting mechanisms, in the case of a Call/Response pattern message, the hub MAY signal errors by generating and passing back to the sender a suitable response map as described in Section 3.9.

4  Standard Profile

Section 3 provides an abstract definition of the operations and data structures used for SAMP messaging. As explained in Section 2.7, in order to implement this architecture some concrete choices about how to instantiate these concepts are required.

This section gives the details of a SAMP Profile based on the XML-RPC specification [8]. Hub discovery is via a lockfile in the user's home directory.

XML-RPC is a simple general purpose Remote Procedure Call protocol based on sending XML documents using HTTP POST (it resembles a very lightweight version of SOAP). Since the mappings from SAMP concepts such as API calls and data types to their XML-RPC equivalents is very straightforward, it is easy for application authors to write compliant code without use of any SAMP-specific library code. An XML-RPC library, while not essential, will make coding much easier; such libraries are available for many languages.

4.1  Data Type Mappings

The SAMP argument and return value data types described in Section 3.3 map straightforwardly onto XML-RPC data types as follows:
SAMP type XML-RPC element
string - <string>
list - <array>
map - <struct>
The <value> children of <array> and <struct> elements themselves contain children of type <string>, <array> or <struct>.

Note that other XML-RPC scalar types (<i4>, <double> etc) are not used; even where the semantic sense of a value matches one of those types it MUST be encoded as an XML-RPC <string>.

4.2  API Mappings

The operation names in the SAMP hub and client abstract APIs (Sections 3.11 and 3.12) very nearly have a one to one mapping with those in the Standard Profile XML-RPC APIs. The Standard Profile API MUST be implemented as described in Sections 3.11 and 3.12 with the following REQUIRED adjustments:
  1. The XML-RPC method names (i.e. the contents of the XML-RPC <methodName> elements) are formed by prefixing the hub and client abstract API operation names with "samp.hub." or "samp.client." respectively.
  2. The register() operation takes the following form: The argument is the samp-secret value read from the lockfile (see Section 4.3). The returned reg-info map contains an additional entry with key samp.private-key whose value is a string generated by the hub.
  3. All other hub and client methods take the private-key as their first argument.
  4. A new method, setXmlrpcCallback() is added to the hub API. This informs the hub of the XML-RPC endpoint on which the client is listening for calls from the hub. The client is not considered Callable unless and until it has invoked this method.
  5. Another new method, ping() is added to the hub API. This may be called by registered or unregistered applications (as a special case the private-key argument may be omitted), and can be used to determine whether the hub is responding to requests. Any non-error return indicates that the hub is running.

The private-key string referred to above serves two purposes. First it identifies the client in hub/client communications. Some such identifier is required, since XML-RPC calls have no other way of determining the sender's identity. Second, it prevents application spoofing, since the private key is never revealed to other applications, so that one application cannot pose as another in making calls to the hub.

The usual XML-RPC fault mechanism is used to respond to invalid calls as described in Section 3.13. The XML-RPC <fault>'s <faultString> element SHOULD contain a user-directed message as appropriate and the <faultCode> value has no particular significance.

4.3  Lockfile and Hub Discovery

Hub discovery is performed by examining a lockfile to determine hub connection parameters, specifically the XML-RPC endpoint at which the hub can be found, and a "secret" token which affords some measure of security. To discover the hub, a client must therefore:
  1. Determine where to find the lockfile (4.3.1)
  2. Read the lockfile to obtain the hub connection parameters (4.3.2)

4.3.1  Lockfile Location

The default location of the lockfile is the file named ".samp" in the user's home directory. However the content of the environment variable named SAMP_HUB can be used to override this default.

The value of the SAMP_HUB environment variable is of the form <samphub-value>, as defined by the following BNF production:
   <samphub-value>  ::=  <hub-location>
   <hub-location>   ::=  <stdlock-prefix> <stdlock-url>
   <lockurl-prefix> ::=  "std-lockurl:"
   <stdlock-url>    ::=  (any URL)

The <stdlock-url> will typically, but not necessarily, be a file-type URL (as described in RFC 1738, section 3.10 [10]). So for instance to indicate that the lockfile to be used will be the file "/tmp/samp1", you would set

Although no other form of the <hub-location> value is defined here, the intention is that the SAMP_HUB environment variable MAY be used with prefixes other than "std-lockurl:" to indicate use of other, non-Standard, profiles. Issues may in future arise related to the need to indicate multiple profiles or profile variants at once; the impact of this requirement on the syntax and semantics of the SAMP_HUB variable is for now deferred.

To locate the lockfile therefore, a Standard Profile-compliant client MUST determine whether an environment variable named SAMP_HUB exists; if so, the client MUST examine the variable's value; if the value begins with the prefix "std-lockurl:" the client MUST interpret the remainder of the value as a URL whose content is the text of the lockfile to be used for hub discovery. If no SAMP_HUB environment variable exists, the client MUST use the file ".samp" in the user's home directory as the lockfile to be used for hub discovery. If the variable exists, but its value begins with a different prefix, the client MAY interpret that in some non-Standard way for hub discovery.

Rules for a Standard Profile-compliant hub to use when writing lockfiles are similar, but if a hub is unable or unwilling to write a lockfile such that it can be read using the above procedure, it MUST signal an error at the startup and then abort. For practical reasons, a hub will probably only be able to write a lockfile indicated by a file-type URL, not for instance an arbitrary http-type one.

The lockfile SHOULD normally be created with permissions which allow only its owner to read it. This provides a measure of security in that only processes with the same permissions as the hub process (hence presumably running under the same user ID) will be able to register with the hub, since only they will be able to provide the secret token, obtained from the lockfile, which is required for registration. Thus under normal circumstances all participants in a SAMP conversation can be presumed to be owned by the same user, and therefore not malicious.2 If a lockfile is made available in some other way, for instance via an unprotected http-type URL in order to facilitate use of the same hub by multiple users on different hosts, a security risk will arise. In that case, a protection through an authentication and/or authorization mechanism might be adopted by the hub implementations, for instance exploiting the TLS cryptographic protocol [11].

The existence or readability of the lockfile MAY be taken (e.g. by a hub deciding whether to start or not) to indicate that a hub is running. However it is RECOMMENDED to attempt to contact the hub at the given XML-RPC URL (e.g. by calling ping()) to determine whether it is actually alive.

The "home directory" referred to above is a somewhat system-dependent concept: we define it as the value of the HOME environment variable on Unix-like systems and as the value of the USERPROFILE environment variable on Microsoft Windows3. "Environment variable" is itself potentially a system-dependent concept, but it is clear how to interpret it for all platforms on which we currently expect SAMP to be used, so no further explanation is provided here.

In version 1.11 of the standard, the lockfile was always in the ".samp" file in the user's home directory. The option of setting the SAMP_HUB environment variable to override this has been introduced to allow more flexibility; for instance one user can run multiple unconnected hubs, or multiple users can share the same hub. If no SAMP_HUB environment variable is defined, client and hub behaviour is exactly as in version 1.11.

4.3.2  Lockfile Content

The format of the lockfile is given by the following BNF productions:
   <file>          ::=   <lines>
   <lines>         ::=   <line> | <lines> <line>
   <line>          ::=   <line-content> <EOL> | <EOL>
   <line-content>  ::=   <comment> | <assignment>
   <comment>       ::=   "#" <any-string>
   <assignment>    ::=   <name> "=" <any-string>
   <name>          ::=   <token-string>
   <token-string>  ::=   <token-char> | <token-string> <token-char>
   <any-string>    ::=   <any-char> | <any-string> <any-char>
   <EOL>           ::=   "\r" | "\n" | "\r" "\n"
   <token-char>    ::=   [a-zA-Z0-9] | "-" | "_" | "."
   <any-char>      ::=   [\x20-\x7f]

The only parts which are significant to SAMP clients/hubs are (a) existence of the file and (b) <assignment> lines.

A legal lockfile MUST provide (in any order) unique assignments for the following tokens:
- An opaque text string which must be passed to the hub to permit registration.
- The XML-RPC endpoint for communication with the hub.
- The version of the SAMP Standard Profile implemented by the hub ("1.3" for the version described by this document).
These keys form the basis of an extensible vocabulary as explained in Section 2.6. Other blank, comment or assignment lines may be included as desired.

An example lockfile might therefore look like this:
# SAMP lockfile written 2008-29-02T17:45:01
# Required keys:
# Info stored by hub for some private reason:

4.3.3  Hub Discovery Sequences

The hub discovery sequences are therefore as follows:

A hub implementation SHOULD make its best effort to perform the shutdown sequence above even if it terminates as a result of some error condition.

Note that manipulation of a file is not atomic, so that race conditions are possible. For instance a client or hub examining the lockfile may read it after it has been created but before it has been populated with the mandatory assignments, or two hubs may look for a lockfile simultaneously, not find one, and both decide that they should therefore start up, one presumably overwriting the other's lockfile. Hub and client implementations should be aware of such possibilities, but may not be able to guarantee to avoid them or their consequences. In general this is the sort of risk that SAMP and its Standard Profile are prepared to take - an eventuality which will occur sufficiently infrequently that it is not worth significant additional complexity to avoid. In the worst case a SAMP session may fail in some way, and will have to be restarted manually.

4.4  Examples

Here is an example in pseudo-code of how an application might locate and register with a hub, and send a message requiring no response to other registered clients.
   # Locate and read the lockfile.
   string hubvar-value = readEnvironmentVariable("SAMP_HUB");
   string lock-location = getLockfileLocation(hubvar-value);
   map lock-info = readLockfile(lock-location);

   # Extract information from lockfile to locate and register with hub.
   string hub-url = lock-info.getValue("samp.hub.xmlprc.url");
   string samp-secret = lock-info.getValue("samp.secret");

   # Establish XML-RPC connection with hub
   # (uses some generic XML-RPC library)
   xmlrpcServer hub = xmlrpcConnect(hub-url);

   # Register with hub.
   map reg-info = hub.xmlrpcCall("samp.hub.register", samp-secret);
   string private-key = reg-info.getValue("samp.private-key");

   # Store metadata in hub for use by other applications.
   map metadata = ("samp.name" -> "dummy",
                   "samp.description.text" -> "Test Application",
                   "dummy.version" -> "0.1-3");
   hub.xmlrpcCall("samp.hub.declareMetadata", private-key, metadata);

   # Send a message requesting file load to all other 
   # registered clients, not wanting any response.
   map loadParams = ("filename" -> "/tmp/foo.bar");
   map loadMsg = ("samp.mtype" -> "file.load",
                  "samp.params" -> loadParams);
   hub.xmlrpcCall("samp.hub.notifyAll", private-key, loadMsg);

   # Unregister
   hub.xmlrpcCall("samp.hub.unregister", private-key);

The first few XML-RPC documents sent over the wire for this exchange would look something like the following. The registration call from the client to the hub:
   POST /xmlrpc HTTP/1.0
   User-Agent: Java/1.5.0_10
   Content-Type: text/xml
   Content-Length: 189

   <?xml version="1.0"?>

which leads to the response:
   HTTP/1.1 200 OK
   Connection: close
   Content-Type: text/xml
   Content-Length: 464

   <?xml version="1.0"?>

The client can then declare its metadata: the response to this call has no useful content so can be ignored or discarded.
   POST /xmlrpc HTTP/1.0
   User-Agent: Java/1.5.0_10
   Content-Type: text/xml
   Content-Length: 600

   <?xml version="1.0"?>
           <value><string>Test application</string></value>

The message itself is sent from the client to the hub as follows:
   POST /xmlrpc HTTP/1.0
   User-Agent: Java/1.5.0_10
   Content-Type: text/xml
   Content-Length: 523

   <?xml version="1.0"?>

Again, there is no interesting response.

5  Web Profile

This section defines the SAMP Web Profile4, which allows web applications to communicate with a SAMP hub. A web application in this context is code which is downloaded by a web browser from a remote server, usually as part of a web page, and which then runs from within that browser. The most common platforms (browser-based runtime environments) for such applications are currently JavaScript (a.k.a. JScript, ECMAScript), Adobe Flash, and Microsoft Silverlight. For security reasons, these runtime environments run the web applications that they host inside a secure "sandbox", which imposes restrictions on access to resources, making it impossible to use the Standard Profile defined in Section 4.

Section 5.1 gives an illustrative overview of the way the Web Profile achieves its communication requirements, with comparison to the Standard Profile. Section 5.2 describes in detail how the Web Profile hub is implemented in order to provide the functionality defined by the SAMP abstract hub and client APIs (Sections 3.11 and 3.12). Section 5.3 outlines the steps that a Web Profile client must take to locate and communicate with the hub. The important topic of the security implications of this scheme, and measures which hub implementations can take in view of these, is covered separately in Section 5.4.

5.1  Overview and Comparison with Standard Profile

The Web Profile is based on the Standard Profile (Section 4), but with some modifications which allow clients to overcome the restrictions imposed by the browser sandbox.

Browser restrictions present four main problems for a web-based SAMP client: hub discovery, outward hub communication, inward hub communication and use of third-party URLs. These are solved in the Web Profile by use of a well-known port, use of standard and de facto cross-origin access techniques, reversed HTTP communication, and URL proxying. These solutions are described, with comparison to the approaches used by the Standard Profile, in the following subsections.

5.1.1  Hub Discovery

A Standard Profile client locates the hub by reading a "lockfile" at a well-known location in the filesystem, which provides the HTTP endpoint at which the hub XML-RPC server is listening and a token which the client must present in order to register. Web applications have no access to the local filesystem and so are unable to read such a lockfile.

In the Web profile, the hub HTTP server listens instead on a well-known port on the local host. The hub will apply some security measures at registration time (Section 5.4), but they are not based on presentation of a secret token.

Note that since this well-known port number is fixed, it is not possible for more than one Web Profile hub to run on the same host. The Web Profile Hub and corresponding web browser MUST run on the same host, and SHOULD always be run by the same user.

For a web client to be able to access this well-known port at all, the cross-origin techniques discussed in the next section are required.

5.1.2  Outward Communications

In the Standard Profile, all hub communication is done using the HTTP-based XML-RPC protocol [8], usually to a port on the local host.

This is problematic for web-based clients, since so-called "cross-origin" or "cross-domain" policies enforced by browsers restrict HTTP access under normal circumstances so that web applications may only make HTTP requests to URLs at their own Origin [19], that is to URLs on the server from which the web application itself was downloaded. This deliberately excludes access to a server on the local host, which is where the SAMP hub is likely to reside.

Since cross-origin access is a common requirement for web-based clients, and it is not always in conflict with the security concerns of servers, a number of platform-dependent but widely-used mechanisms have been implemented in browser technology which allow a sandboxed client to talk to an HTTP server which has explicitly opted in for such cross-origin communications. A Web Profile hub will implement one or more of these cross-origin workarounds (Section 5.2.3) and so permit Web Profile clients running in the relevant browser runtime environment(s) to make HTTP requests to itself, thereby allowing client-to-hub XML-RPC calls.

5.1.3  Inward Communications

In order to receive as well as send messages, and also to make asynchronous calls, a SAMP client must declare itself Callable , by providing the Hub with a profile-dependent means to invoke the client API defined in Section 3.12.

In the Standard Profile a client declares itself Callable by providing to the Hub an HTTP endpoint to which the Hub may make XML-RPC requests. Thus, the client must itself run a publicly accessible HTTP server in order to be callable. Running an HTTP server is typically not within the capabilities of a web application.

In the Web Profile, hub-to-client communication is effected by reversing the direction of the XML-RPC calls, and hence of the HTTP requests. Instead of the client running a server which listens for incoming messages from the Hub, the Hub maintains a queue of messages destined for the client, and the client polls the Hub to find out if any are available. The client may either make periodic short-timeout requests to the hub, or make a long-timeout ("long poll") request which will return early if and when one or more messages are available. This effects inward communications using only the same outward HTTP capability discussed in the previous section.

5.1.4  Third-Party URLs

Although it is not fundamental to the SAMP protocol itself, many SAMP MTypes are defined in such a way that a receiving client must retrieve data from a URL external to the SAMP client-hub system in order to act on them. For instance the table.load.votable MType has an argument named "url", whose value is the location of the VOTable document to be loaded. Such URLs may point to the local filesystem, to a server run by the sending client, or to some other web server internal or external to the host on which the SAMP communications are taking place. In any of these cases, it is likely that a browser-based client will be blocked by the browser's cross-origin policy from access to the content of the resource in question.

The Web Profile therefore mandates that the Hub must provide to registered clients a mechanism for translating arbitrary URLs into cross-origin-accessible URLs with the same content as the specified resource. Since a hub must already be providing a cross-origin capable HTTP service accessible from the web client, it can use the same mechanism to operate a service which proxies external resources in a cross-origin capable way.

5.2  Hub Behaviour

This section specifies in detail the services that a SAMP hub must provide in order to implement the SAMP Web Profile.

The Web Profile is based on one-way client-to-hub XML-RPC communications, with the hub residing at a well-known port, and some special measures for allowing cross-origin requests. In most ways it resembles the Standard Profile (Section 4), but there are some differences.

5.2.1  Data Type Mappings

SAMP argument and return value data types are encoded into XML-RPC exactly as for the Standard Profile (Section 4.1).

5.2.2  API Mappings

The operation names in the SAMP hub API very nearly have a one to one mapping with those in the Web Profile XML-RPC API. The Web Profile Hub API MUST be implemented as described in Section 3.11, with a number of REQUIRED adjustments. These are summarised as follows, and described in more detail later.

  1. The XML-RPC method names (i.e. the contents of the XML-RPC <methodName> elements) are formed by prefixing the hub abstract API operation names with "samp.webhub.". For brevity, this prefix is not written in the rest of this document, but it is to be understood on all hub API XML-RPC calls.
  2. The register() operation takes the following form: The security-info is a map containing at least a declared application name supplied by the registering application to indicate its identity. This SHOULD be presented by the hub to the user when the user's consent is requested for registration.
  3. The reg-info map returned from the register method MUST contain two entries additional to those mandated by the hub API:
    used as the first argument of all hub API XML-RPC calls
    used for translation of foreign URLs for cross-origin accessibility
  4. All hub methods other than register take the private-key as their first argument, except where otherwise noted (ping). For brevity, this argument is not written in the rest of this document, but it is to be understood on all hub API calls.
  5. Two new methods are added to the hub API to support reversed callbacks (Section 5.2.5):
  6. Another new method is added to the hub API: This may be called by registered or unregistered applications (as a special case the private-key argument may be omitted), and can be used to determine whether the hub is responding to requests. Any non-error return indicates that the hub is running.

5.2.3  Hub HTTP Server

Communications are XML-RPC calls [8] from the client to the Hub. XML-RPC works using POSTs to an HTTP server. The Web Profile hub HTTP server resides on the well-known port 21012, so that clients know where to find it on the local host. The XML-RPC endpoint for Web Profile requests is at the root of that server, so that web clients can access it by POSTing to the URL "http://localhost:21012/".

In general, web applications operate inside a browser-enforced sandbox that prevents them from accessing cross-origin resources, including HTTP-based ones served from the local host. However there are a number of ways in which an HTTP server can elect to permit access from browser-based clients. In order to be useful a Web Profile hub must implement at least some of these "cross-origin workarounds".

The following cross-origin workarounds are known to exist, and can be considered for use by Web Profile hub HTTP servers:
Cross-Origin Resource Sharing:
CORS [12] is a W3C standard which works by manipulation of the HTTP Origin header and related headers by the browser runtime environment and the HTTP server, allowing the HTTP server to grant cross-domain access from clients with some or all Origins. CORS forms part of the XmlHttpRequest Level 2 standard [13], which is implemented by Chrome v2.0+, Firefox v3.5+ and Safari v4.0+. Microsoft's IE8+ implements CORS via its own non-standard XDomainRequest object. This standard belongs to the loose HTML5 family of technologies, and it is likely that support will become wider in the future. A Web Profile hub HTTP server can grant unrestricted access to CORS-aware web applications by following the instructions in the CORS standard to enable both simple and preflight requests from clients with any Origin.
Flash cross-domain policy:
Adobe's Flash browser plugin makes use of a resource named "crossdomain.xml", which, if present on an external HTTP server, is taken to indicate willingness to serve cross-domain requests [14]. This has emerged as something of a de facto standard, and the crossdomain file is honoured by Silverlight and unsigned Java Applets/WebStart applications5 as well as for Flash applications. A Web Profile hub HTTP server can grant unrestricted access to to Flash-like web applications by serving a resource named "/crossdomain.xml" with a Content-Type header of "text/x-cross-domain-policy" and content like:
   <?xml version="1.0"?>
   <!DOCTYPE cross-domain-policy
             SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
     <site-control permitted-cross-domain-policies="all"/>
     <allow-access-from domain="*"/>
     <allow-http-request-headers-from domain="*" headers="*"/>

Silverlight cross-domain policy:
Microsoft's Silverlight environment will take note of Flash-style crossdomain.xml files, so the above measure ought to permit Silverlight clients to access a compliant HTTP server. However, Silverlight has its own cross-domain policy mechanism [15], which may be implemented in addition. A Web Profile hub HTTP server can grant unrestricted access to Silverlight web applications by serving a resource named "/clientaccesspolicy.xml" with a Content-Type header of "text/xml" and content like:
   <?xml version="1.0"?>
           <domain uri="http://*"/>
           <resource path="/" include-subpaths="true"/>

If the hub implements these cross-origin workarounds it is believed that cross-origin access, hence Web Profile SAMP access, can be provided from nearly all browsers. Many modern browsers support CORS for JavaScript, nearly all others support Flash, and JavaScript applications can make use of Flash libraries for their SAMP communications. Maximum interoperability therefore can be achieved by implementing all of these, or at least CORS and Flash, in the Web Profile HTTP server.

The choice of which ones to implement however has security implications; one consideration is that client Origin can only be reliably determined when CORS is used.

Web applications will always seek the Web Profile HTTP server on the local host. Since there is no legitimate use of the Web Profile HTTP server from non-local hosts, it is therefore strongly RECOMMENDED for security reasons that the Web Profile HTTP server refuses all HTTP requests from external hosts with a 403 Forbidden status.

5.2.4  Registration

In order to request registration with the Web Profile, a client needs to invoke the following XML-RPC method:
   map register(map security-info)

The security-info map provides information which can inform the hub's decision about whether to allow registration. It has the following REQUIRED entry:
- A string giving the name of the application wishing to register, in a form that can be presented to the user. This SHOULD be the same as the value of the samp.name key in the application metadata as described in Section 3.6.
Particular implementations or future versions of this standard may specify additional required or optional entries to this map.

The hub will accept or reject the registration based on the contents of the security-info map, available information from the HTTP connection carrying the XML-RPC call, and the hub's own security policy. Some aspects of the basis for that decision are discussed in Section 5.4. The register XML-RPC request will not return until the hub has decided whether to accept registration. This decision may involve user interaction and hence take a significant amount of time. The likely timescales mean that an HTTP timeout is possible but not very probable; in case of a timeout, registration fails.

If registration is accepted, the hub MUST return to the client a SAMP map containing the entries mandated by Section 3.5 and also the following entries:

The value of this key is a string which identifies the registered client. This string SHOULD be difficult for third parties to guess. This arrangement is the same as for the Standard Profile (Section 4.2)
The value of this key is a string which forms the base for a URL proxying service, used as described in Section 5.2.6

If registration is rejected, the hub MUST return to the client an XML-RPC Fault, which SHOULD have a suitably explanatory faultString.

5.2.5  Callable Clients

In order to be able to receive communications (incoming messages and asynchronous call replies) from the hub, the Web Profile provides for the client to be able to poll the hub server for any messages or replies which are ready for receipt. In this way, such communications are pulled by the client rather than being pushed by the hub, so that no server component is required on the client side.

Two hub methods are provided to implement this: Both these methods, like the others in the interface, are named with the samp.webhub. prefix and take the private-key as an additional first argument.

The allow argument of allowReverseCallbacks is a SAMP boolean ("0" for false or "1" for true), and the timeout-secs argument of pullCallbacks is a SAMP int (see Section 3.4).

If a client intends at some time in the future to poll for callbacks it MUST invoke allowReverseCallbacks with a true argument. If at some later point it decides that it will remain registered but will never poll for callbacks again it SHOULD invoke allowReverseCallbacks with a false argument (most clients will never make this second call). The client becomes callable only when it has invoked this method with a true argument.

Having invoked allowReverseCallbacks with a true argument, the client SHOULD periodically invoke pullCallbacks whose return value gives the details of any callbacks ready for dispatch to the client. The timeout-secs parameter is the maximum number of seconds the client wishes to wait for a response. When the method is called, the hub SHOULD wait until at least one callback is available, and at that point SHOULD return any pending callbacks. If the elapsed time since pullCallbacks was received exceeds the number of seconds given by the timeout-secs argument, the hub SHOULD return with an empty list of callbacks. A client may therefore make a non-waiting poll by using a timeout-secs argument of 0. The hub MAY return with an empty list of callbacks before the given timeout has elapsed, for instance if it reaches an internal timeout limit.

The hub MAY discard pending messages before they have been polled for by the client, for instance to avoid excessive usage of resources to store them. If a receiveCall for an Asynchronous Call/Response-pattern message is discarded in this way, the hub SHOULD inform the sender by passing back a samp.code=samp.noresponse-type error response, as described in Section 3.9.

The format of the returned value from pullCallbacks is a list of elements each of which is a map representing a callback corresponding to one of the methods in the SAMP client API (Section 3.12). Each of these callbacks is encoded as a map with the following REQUIRED keys:
- The client API method name for the callback. Its value is a string taking one of the values "receiveNotification", "receiveCall" or "receiveResponse".
- A list of the parameters taken by the client API method in question, as documented in Section 3.12.
These items correspond to the elements present in an XML-RPC call.

Here is an example of a call to pullCallbacks. The client POSTs an XML-RPC call which requests any callbacks which are currently pending or which become available during the next 600 seconds:
Host: localhost:21012
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:
 Gecko/20101028 Red Hat/3.6-2.el5 Firefox/3.6.11
Referer: http://www.star.bris.ac.uk/~mbt/websamp/sample.html
Content-Length: 284
Content-Type: text/plain; charset=UTF-8
Origin: http://www.star.bris.ac.uk

<?xml version='1.0'?>

The response, which is returned by the hub after some delay between 0 and 600 seconds, specifies a receiveCall operation that the client should respond to:
200 OK
Content-Length: 1444
Content-Type: text/xml
Access-Control-Allow-Origin: http://www.star.bris.ac.uk

<?xml version='1.0' encoding='UTF-8'?>

Some of the HTTP headers in the outgoing request in this example have been added outside of the client's control by the browser runtime environment. In particular the Origin inserted by the browser, and the Access-Control-Allow-Origin provided in response by the Hub, indicate that CORS negotiation [12] is in operation here to allow cross-origin access.

5.2.6  URL Translation

In order that sandboxed clients are able to obtain the content of URLs from foreign domains, as is often required by SAMP interoperation, the hub provides a service which is able to dereference general URLs.

At registration time, as described in Section 5.2.4, one of the values provided to the registering client is that of the samp.url-translator key. This is a partial URL which, when another URL u1 is appended to it, will return the same content as u1 from an HTTP GET request. If u1 is a syntactically legal URL according to RFC 2396 [16], no additional encoding needs to be performed on it by the client prior to the concatenation.

A sample of ECMAScript code using this facility might look something like this:
   var url_trans = reg_info["samp.url-translator"];
   var u1 = msg["samp.params"]["url"];   // base URL received from message
   var u2 = url_trans + u1;              // URL ready for retrieval

The partial translator URL might typically be implemented as a URL pointing to the same HTTP server in which the hub is hosted, with an empty query part. The content of URLs accessed in this way SHOULD be available under the same cross-origin arrangements described in Section 5.2.3. For security reasons the hub SHOULD ensure that this facility can only be used by registered clients, for instance by embedding the private key in the URL. Thus a translator URL might look something like
http://localhost:21012/translator/client-private-key ?

The URL translation service SHOULD in general write an HTTP response with HTTP headers appropriate for the resource being served, in accordance with the HTTP version in use (e.g. [17]). Where the content type of a resource is not known (which is typical if that resource is backed by a file rather than an HTTP URI) the HTTP Content-Type header MAY be omitted.

For security reasons, such a hub URL translation service MAY refuse access to certain resources, for instance sensitive files on the local filesystem. A 403 Forbidden HTTP status code should be used in this case. Note however that legitimate use of SAMP is likely to require access to some local files, typically temporary files written for data exchange.

5.3  Client Behaviour

The steps that a client must take to register with a Web Profile hub and participate in two-way SAMP communications are as follows:
  1. Prepare to make XML-RPC communications with the XML-RPC endpoint http://localhost:21012/. Web applications will need to do this using a client which supports one of the cross-origin workarounds described in Section 5.2.3 and supported by the Web Profile hub.
  2. Call the register XML-RPC method supplying a short application name and possibly other information in the security-info argument. If this succeeds (returns a non-Fault XML-RPC response), the client is registered.
  3. If the client wishes to receive as well as send communications (to be Callable ), first call allowReverseCallbacks and then periodically call pullCallbacks. Call declareSubscriptions as required.
  4. Act on retrieved callbacks as required. If any MType argument or return value is a URL, prefix it with the value of the samp.url-translator entry from the registration map before dereferencing it.
  5. Send SAMP messages etc as required.
  6. Unregister when no further SAMP activity is required, either because the user requests disconnection or on page unload or a similar event.

5.4  Security Mechanisms

Web browsers implement cross-origin access restrictions in order to prevent web applications from activity on a local host which presents a security risk, for instance reading and writing local files. This means that, at least in principle, a user can visit a web page without worrying about security issues, in a way which is not the case if they download and install an application to run outside a browser.

The Web Profile described in the preceding subsections however relies on neutralising these security measures to some extent. Although it only affects access to a single resource, the HTTP server on which the SAMP hub resides, this is a serious matter, since any client registered with the SAMP Hub has indirect access, via exchange of SAMP messages with other clients, and also via the Web Profile's URL translation service, to many resources on the hub's host. In fact it is probably safest to assume that a registered client may be able to perform any action consistent with the system privileges of the user under whose identity the Hub, or of any client connected to it, is running.

The crucial issue is that only registered SAMP clients are able to perform potentially dangerous activities. Although the hub's HTTP server itself is open to access by any locally running web application, only a registered SAMP client can use that access to do anything useful or potentially dangerous (with the exception of a denial of service attack, which sandboxed web clients are capable of in any case).

The Web Profile, by implementing one or more of the cross-origin workarounds described in Section 5.2.3, effectively removes the access control applied by the browser to HTTP requests originating from web applications. It must therefore enforce security by applying restrictions about which applications are allowed to register. Once a client has registered, that client has full access to local resources, so the security of the Web Profile comes down to ensuring that registration is accepted only from trusted web applications.

The decision about whether the Hub will accept or reject a given Web Profile registration request from a web application is made with reference to the following policies:
1. Restrict to local host:
only registration requests originating from the local host should be permitted
2. Require user confirmation:
registration should only be permitted if explicitly authorised on a per-request basis by the user
3. Attempt client authentication:
under some circumstances it might be possible to perform some level of authentication of the provider of a web application; such an authenticated identity could be used to decide whether registration will be accepted
These policies are discussed in more detail in the following subsections.

5.4.1  Local Host Restriction

As recommended in Section 5.2.3, registration requests, and in fact all access to the hub HTTP server, will only be permitted from the local host. This blocks registration attempts from web or non-web applications on the internet at large. The only applications which may attempt to register with a hub run by user U are therefore:
  1. web applications running in a browser run by user U on the local host
  2. non-web applications run by user U on the local host
  3. web or non-web applications run by users other than U on the local host
Type 1 are the applications that the Web Profile is designed to serve. Type 2 are not what the Web Profile is designed for, since they could use the Standard Profile instead, but they already have user privileges so present no additional security risk. Type 3 are potentially problematic, if the host in question is a multi-user machine, since they may result in a different user who is already able to run processes on the local host getting access to the hub-owner's resources (e.g. private files). In practice the User Confirmation step should serve to distinguish type 3 from legitimate (Type 1) requests.

5.4.2  User Confirmation

It is strongly RECOMMENDED that the Hub requires explicit confirmation from the user before any Web Profile application is allowed to register. This will normally take the form of the Hub popping up a dialogue window which requires the user to click "OK" or similar for registration to proceed. An implication of this is that the Web Profile Hub must have access to the same visual display on which the browser is running, which almost certainly means the hub and the browser are run by the same user.

When enquiring about authorization the Hub should make clear to the user the security implications of accepting the registration request, and should also present to the user any available information about the application wishing to register. Unfortunately, little such information is guaranteed to be available. The name declared by the application as part of its registration request will be present, but the application is free to declare any name, perhaps a misleading one. The application Origin [19] may be available if CORS is in use, but is not provided by the other cross-origin workarounds.

Since only the name, which may be chosen at will by the registering application, is guaranteed present, this looks on the face of it like a poor basis on which to accept or reject registration by a potentially hostile web application.

However, in practice the timing of the request presentation provides the most useful information about the identity and credibility of the request. A user will only see such a popup dialogue at the time that a web application attempts to register with SAMP. This will normally be immediately following a deliberate user browser action like opening, or clicking a "Register" button, on a web page. If the user trusts the web page he has just interacted with, he can trust the application within it, and should hence authorize registration. If the user does not trust the web page he has just interacted with, or if the popup appears at a time when no obvious action has been taken to trigger a SAMP registration, then the user should deny registration. This pattern of user interaction, requiring authorization based on the timing of actions in a browser, is both intuitive and familiar to users; for instance it is used when launching a signed Java applet or Java WebStart application.

5.4.3  Client Authentication

As an additional security measure it would be desirable to make a reliable identification of the author of a web application by examining an associated digital certificate, with reference to a list of trusted certificate authorities. If a certificate reliably associated with the application could be obtained, this additional information could be presented to the user or used automatically by the hub to inform the decision about whether to accept or reject the registration request.

Unfortunately neither the content nor the URL of the actual application can in general be determined by the Hub at registration time, so signing the application code itself will not help.

The Web Profile does not at present therefore provide any mechanism for client authentication. However it may be possible to provide some level of authentication in the future, perhaps by somehow associating a certificate with the web client's Origin.

5.4.4  Security Summary

The level of security provided by the Web Profile as described in this section is similar to that provided by existing deployments of privileged (i.e. non-sandboxed) web-based applications, for which common practice for several years up to and including the time of writing (2011) is self-signed Java WebStart applications or applets. Although the certification mechanism used by signed Java applets provides for secure authentication, typical deployments for astronomical tools (e.g. Aladin, TOPCAT, WebSampConnector-based pages), being self-signed, do not take advantage of this, and therefore while they may present the impression of reliable authentication, they in fact provide no such thing. To date, this situation does not appear to have led to serious or widespread security issues for working astronomers.

The security is however fairly weak, and abuse by malicious web applications using phishing-like or other attacks is a possibility. Research will continue in Web SAMP hub implementations into more secure arrangements. This may lead to modifications to the protocol or to recommendations on best practice to be documented in future versions of this standard or elsewhere. In the mean time, care should be taken that users are not exposed to the risks without explicit warning of the dangers. Providing careful warnings in the User Confirmation stage is one aspect of this; another might be to configure publicly distributed hubs with the Web Profile disabled unless explicitly enabled by the user.

6  MTypes: Message Semantics and Vocabulary

A message contains an MType string that defines the semantic meaning of the message, for example a request for another application to load a table. The concept behind the MType is similar to that of a UCD [20] in that a small vocabulary is sufficient to describe the expected range of concepts required by a messaging system within the current scope of the SAMP protocol. Developers are free to introduce new MTypes for use within applications without restriction; new MTypes intended to be used for Hub messaging or other administrative purposes within the messaging system should be discussed within the IVOA for approval as part of the SAMP standard.

6.1  The Form of an MType

MType syntax is formally defined in Section 3.7. Like a UCD, an MType is made up of atoms. These are not only meaningful to the developer, but form the central concept of the message. Because the capabilities one application is searching for are loosely coupled with the details of what another may provide, there is not a rigorous definition of the behavior that an MType must provoke in a receiver. Instead, the MType defines a specific semantic message such as "display an image", and it is up to the receiving application to determine how it chooses to do the display (e.g. a rendered greyscale image within an application or displaying the image in a web browser might both be valid for the recipient and faithful to the meaning of the message).

The ordering of the words in an MType SHOULD normally use the object of the message followed by the action to be performed (or the information about that object). For example, the use of "image.display" is preferred to "display.image" in order to keep the number of top-level words (and thus message classes) like `image' small, but still allow for a wide variety of messages to be created that can perform many useful actions on an image. If no existing MType exists for the required purpose, developers can agree to the use of a new MType such as "image.display.extnum" if, e.g., the ability to display a specific image extension number warrants a new MType.

6.2  The Description of an MType

In order that senders and recipients can agree on what is meant by a given message, the meaning of an MType must be clearly documented. This means that for a given MType the following information must be available:
  1. The MType string itself
  2. A list of zero or more named parameters
  3. A list of zero or more named returned values
  4. A description of the meaning of the message
For each of the named parameters, and each of the returned values, the following information must be provided: Together, this is much the same information as should be given for documentation of a public interface method in a weakly-typed programming language.

The parameters and return values associated with each MType form extensible vocabularies as explained in Section 2.6, except that there is no reserved "samp." namespace.

Note that it is possible for the MType to have no returned values. This is actually quite common if the MType does not represent a request for data. It is not usually necessary to define a status-like return value (success or failure), since this information can be conveyed as the value of the samp.status entry in the call response as described in Section 3.9.

6.3  MType Vocabulary: Extensibility and Process

The set of MTypes forms an extensible vocabulary along the lines of Section 2.6. The relatively small set of MTypes in the "samp." namespace is defined in Section 6.4 of this document, but applications will need to use a wider range of MTypes to exchange useful information. Although clients are formally permitted to define and use any MTypes outside of the reserved "samp." namespace, for effective interoperability there must be public agreement between application authors on this unreserved vocabulary and its semantics.

Since addition of new MTypes is expected to be ongoing, MTypes from this broader vocabulary will be documented outside of this document to avoid the administrative overhead and delay associated with the IVOA Recommendation Track [21]. At time of writing, the procedures for maintaining the list of publicly-agreed MTypes are quite informal. These procedures remain under review, however the current list and details of best practice for adding to it are, and will remain, available in some form from the URL http://www.ivoa.net/samp/.

6.4  Core MTypes

This section defines those MTypes currently in the "samp." hierarchy. These are the "administrative"-type MTypes which are core to the SAMP architecture or widely applicable to SAMP applications.

6.4.1  Hub Administrative Messages

The following MTypes are for messages which SHOULD be broadcast by the hub in response to changes in hub state. By subscribing to these messages, clients are able to keep track of the current set of registered applications and of their metadata and subscriptions. In general, non-hub clients SHOULD NOT send these messages.
Return Values:
The hub SHOULD broadcast this message just before it exits. It SHOULD also send it to clients who are registered using a given profile if that profile is about to shut down, even if the hub itself will continue to operate. The hub SHOULD make every effort to broadcast this message even in case of an exit due to an error condition.

id (string) -
Public ID of newly registered client
Return Values:
The hub SHOULD broadcast this message every time a client successfully registers.

id (string) -
public ID of unregistered client
Return Values:
The hub SHOULD broadcast this message every time a client unregisters.

id (string) -
public ID of client declaring metadata
metadata (map) -
new metadata declared by client
Return Values:
The hub SHOULD broadcast this message every time a client declares its metadata. The metadata argument is exactly as passed using the declareMetadata() method.

id (string) -
public ID of subscribing client
subscriptions (map) -
new subscriptions declared by client
Return Values:
The hub SHOULD broadcast this message every time a client declares its subscriptions. The subscriptions argument is exactly as passed using the declareSubscriptions() method, and hence may contain wildcarded MType strings.

reason (string) -
(OPTIONAL) Short text message indicating the reason that the disconnection is being forced
Return Values:
The hub SHOULD send this message to a client if the hub intends to disconnect that client forcibly. This indicates that no further communication from that client is welcome, and any such attempts may be expected to fail. The hub may wish to disconnect clients forcibly as a result of some hub timeout policy or for other reasons.

6.4.2  Client Administrative Messages

The following messages are generic messages defined for client use.
Return Values:
Diagnostic used to indicate whether an application is currently responding. No "status"-like return value is defined, since in general any response will indicate aliveness, and the normal samp.status key in the response may be used to indicate any abnormal state.

txt (string) -
Textual indication of status
Return Values:
General purpose message to indicate application status.

Return Values:
Indicates that the sending application is going to shut down. Note that sending this message is not a substitute for unregistering with the hub - registered clients about to shut down SHOULD always explicitly unregister.

msgid (string) -
Message ID of a previously received message
txt (string) -
Textual indication of progress
percent (string) -
(OPTIONAL) SAMP float value giving the approximate percentage progress
timeLeft (string) -
(OPTIONAL) SAMP float value giving the estimated time to completion in seconds
Return Values:
Reports on progress of a message previously received by the sender of this message. Such progress reports MAY be sent at intervals between the receipt of the message and sending a reply. Note that the msg-id of the earlier message must be passed to identify it - the sender of the earlier message (the recipient of this one) will have to have retained it from the return value of the relevant call*() method to match progress reports with requests.

A  Changes between PLASTIC and SAMP

In order to facilitate the transition from PLASTIC to SAMP from an application developer's point of view, we summarize in this Appendix the main changes. In some cases the reasons for these are summarized as well.

Language Neutrality:
PLASTIC contained some Java-specific ideas and details, in particular an API defined by a Java interface, use of Java RMI-Lite as a transport protocol option, and a lockfile format based on java Property serialization. No features of SAMP are specific to, or defined with reference to, Java (or to any other programming language).
The formal notion of a SAMP Profile replaces the choices of transport protocol in PLASTIC.
Much of the terminology has changed between PLASTIC and SAMP, in some cases to provide better consistency with common usage in messaging systems. There is not in all cases a one-to-one correspondence betweeen PLASTIC and SAMP concepts, but a partial translation table is as follows:
message MType
support a message subscribe to an MType
registered application client
synchronous request synchronous call/response
asynchronous request notification
In PLASTIC message semantics were defined using opaque URIs such as ivo://votech.org/hub/event/HubStopping. SAMP replaces these with a vocabulary of structured MTypes such as samp.hub.event.shutdown.
Responses from messages in PLASTIC were returned synchronously, using blocking methods at both sender and recipient ends. As well as inhibiting flexibility, this risked timeouts for long processing times at the discretion of the underlying transport. The basic model in SAMP relies on asynchronous responses, though a synchronous façade hub method is also provided for convenience of the sender. Client toolkits may also wish to provide client-side synchronous façades based on fully asynchronous messaging.
In PLASTIC clients registered with a single call which acquired a hub connection and declared callback information, message subscriptions, and some metadata. In SAMP, these four operations have been decomposed into separate calls. As well as being tidier, this offers benefits such as meaning that the subscriptions and metadata can be updated during the lifetime of the connection.
Client Metadata:
PLASTIC stored some application metadata (Name) in the hub and provided acess to others (Description, Icon URL, ...) using custom messages. SAMP stores it all in the hub providing better extensibility and consistency as well as improving metadata provision for non-callable applications and somewhat reducing traffic and burden on applications.
Named Parameters:
The parameters for PLASTIC messages were identified by sequence (forming a list), while the parameters for SAMP MTypes are identified by name (forming a map). As well as improving documentability, this makes it much more convenient to allow for optional parameters or to introduce new ones. The same arrangement applies to return values.
Recipient Targetting:
PLASTIC featured methods for sending messages to all or to an explicit list of recipients. In practice the list variants were rarely used except to send to a single recipient. SAMP has methods for sending to all or to a single recipient.
Data types in PLASTIC were based partly on Java and partly on XML-RPC types. There was not a one-to-one correspondence between types in the Java-RMI transport and the XML-RPC one, which encouraged confusion. Parameter types included integer, floating point and boolean as well as string, which proved problematic to use correctly from some weakly-typed languages. SAMP uses a more restricted set of types (namely string, list and map) at the protocol level, along with some auxiliary rules for encoding numbers and booleans as strings.
The lockfile in SAMP's standard profile is named .samp, its format is defined explicitly rather than with reference to Java documentation, and there is better provision for its location in a language-independent way on MS Windows systems. In many cases however, the same lockfile location/parsing code will work for both SAMP and PLASTIC except for the different filenames (".samp" vs. ".plastic").
Public/Private ID:
In PLASTIC a single, public ID was used to label and identify applications during communications directed to the hub or to other applications. This meant that applications could easily, if they wished, impersonate other applications. The practice in SAMP is to use different IDs for public labelling and private identification, which means that such "spoofing" is no longer a danger.
SAMP has provision to return more structured error information than PLASTIC did.
Although PLASTIC was in some ways extensible, SAMP provides more hooks for future extension, in particular by pervasive use of the extensible vocabulary pattern.

B  Change History

Changes to SAMP between Working Draft version 1.0 (2008-06-25) and Recommendation version 1.11 (2009-04-21):

Changes to SAMP between Recommendation version 1.11 (2009-04-21) and version 1.2:

Changes to SAMP between Recommendation version 1.2 (2010-12-16) and version 1.3:


C. Arviset et al., "IVOA Architecture", IVOA Note, 2010
F. Bonnarel, P. Fernique, O. Bienaymé, D. Egret, F. Genova, M. Louys, F. Ochsenbein, M. Wenger, and J. G. Bartlett, "The ALADIN interactive sky atlas. A reference tool for identification of astronomical sources", A&AS, 143:33-40, 2000
U. Becciani, M. Comparato, A. Costa, C. Gheller, B. Larsson, F. Pasian, and R. Smareglia. "VisIVO: an interoperable visualisation tool for Virtual Observatory data", Highlights of Astronomy, 14:622-622, 2007
J. Taylor, T. Boch, M. Comparato, M. Taylor, and N. Winstanley. "PLASTIC - a protocol for desktop application interoperability", IVOA Note, 2006
S. Bradner, RFC 2119: "Key words for use in RFCs to Indicate Requirement Levels", IETF Request For Comments, 1997
T. Berners-Lee, L. Masinter, M. McCahill, RFC 1738: "Uniform Resource Locators (URL)", IETF Request For Comments, 1994
T. Dierks, C. Allen, RFC 2246: "The TLS Protocol", IETF Request For Comments, 1999
A. van Kesteren (Ed.), "Cross-Origin Resource Sharing", W3C Working Draft, 2010
A. van Kesteren (Ed.), "XMLHttpRequest Level 2", W3C Working Draft, 2010
Adobe Flash cross-domain policy, http://www.adobe.com/devnet/articles/crossdomain_policy_file_spec.html
Microsoft Silverlight cross-domain policy, http://msdn.microsoft.com/en-us/library/cc645032(VS.95).aspx
T. Berners-Lee et al., RFC 2396: "Uniform Resource Identifiers (URI): Generic Syntax", IETF Request For Comments, 1998
R. Fielding et al., RFC 2616: "Hypertext Transfer Protocol - HTTP/1.1", IETF Request For Comments, 1999
D. Eastlake et al., RFC 3275: "XML-Signature Syntax and Processing", IETF Request For Comments, 2002
A. Barth, "The Web Origin Concept", IETF Draft, 2010
S. Derriere et al. "An IVOA Standard for Unified Content Descriptors", IVOA Recommendation, 2005
R. J. Hanisch et al. "IVOA Document Standards", IVOA Recommendation, 2003


1 One way a hub might implement this is to generate msg-id by concatenating the sender's client ID and the msg-tag . When any response is received the hub can then unpack the accompanying msg-id to find out who the original sender was and what msg-tag it used. In this way the hub can determine how to pass each response back to its correct sender without needing to maintain internal state concerning messages in progress. Hub and client implementations may wish to exploit this freedom in assigning message IDs for other purposes as well, for instance to incorporate timestamps or checksums.

2 Of course they may be owned by the same user and still be malicious, but in this case SAMP represents no additional security risk.

3 Note to Java developers: contrary to what you might expect, the user.home system property on Windows does not give you the value of USERPROFILE. See http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4787931.

4The Web Profile is based on an original idea of Jonathan Fay, and its development was largely funded by Microsoft Research.

5Support for the crossdomain.xml file is reportedly implemented in Java v1.6.0_10 and later, see http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6676256.

File translated from TEX by TTH, version 3.80.
On 5 Sep 2011, 09:58.